If you've got a new pellet stove and an existing masonry chimney, you can probably vent the stove through the chimney and save yourself the trouble of installing a through-the-wall vent. However, using a masonry chimney to vent the stove requires some preparation and some additional materials. Before you install your pellet stove or its vent, have your chimney inspected and cleaned by a qualified professional. It will be easier to fix any defects you find in your chimney at this point than it will be after you install the stove vent, and venting the stove through a clean chimney will be safer. Also, check with your local building authority to be sure it's legal to install the type of stove you want, and to secure the proper permits. Your stove's vent pipe connects to a stainless steel liner that extends into the existing masonry chimney.
How to Install a Pellet Stove
How to Install a Pellet-Stove Insert | aalvik.info
Click to see full answer. Hereof, can you hook up a pellet stove to a wood stove chimney? Yes, your pellet stove can be vented through your existing chimney , providing your pellet stove is placed in front of your existing fireplace and you have the proper clearance, the airspace between the stove , the walls and you meet the minimums as defined in the owner's manual. Furthermore, are pellet stoves worth it?
How to Install a Pellet-Stove Insert
Last winter, Connecticut homeowners Keith Goodrow and Jody Willis began looking into ways to cut their fuel bills. Looking for a way to trim that number, they decided to follow the lead of a neighbor who had installed a stove that burns pellets made from wood, or, to be precise, sawdust. These clean-burning stoves form one leg of a dual-fuel strategy that is appealing to growing numbers of homeowners concerned with personal independence, sustainability and cost savings.
Pellet stove battery backup is a standard feature on a few stoves, all you have to do is to provide the battery. These stoves use twelve volt motors, and when running on mains power, voltage is stepped down before entering the stove system. The power available from a battery is not enough at the moment to run an automatic ignition system, which would be very demanding and shorten battery life, so stoves running on battery power have to be lit manually using starter gel and pellets. Placement of the pellet stove battery backup will ideally be about six feet from the pellet stove to avoid excessive heat and to maintain a fairly short cable run. It should be placed in a vented battery box.